How can we know that the fuel injection
nozzle of motorcycle is blocked
So, how to know that the fuel injection
nozzle is blocked? When the fuel injection nozzle is slightly blocked,
sometimes there will be such a fault: shift to first gear, start, the car
vibrates, and when the car is in high gear and acceleration, this phenomenon
will disappear again. Assuming that all kinds of sensors on the car work
normally, the throttle valve has been cleaned, and the circuit is normal, it is
likely that the fuel injection nozzle is slightly blocked. However, when
accelerating in high gear, it is possible that the slight gum will be sprayed
away (dissolved) again, and the performance of the car will be restored. Such a
slight blockage of the fuel injection nozzle, generally can not be cleaned.
Because the slight gum can be dissolved.
In daily driving, we should often run a
high speed in order to reduce the possibility of carbon deposition. If the fuel
injection nozzle is not cleaned for a long time in vehicles with poor gasoline
quality or long driving time, the blockage will be more serious, resulting in
poor fuel injection, poor injection angle and atomization, resulting in poor
engine operation at idle speed, acceleration or full load, resulting in engine
power reduction, fuel consumption increase, emission pollution increase, and
even make the engine unable to operate Work.
Therefore, it is necessary to clean the
fuel injection nozzle regularly. Long term non cleaning or frequent cleaning of
the nozzle will cause bad effect
|
